 |
|
| Industrial Water Chiller
|
| Water Chiller
|
| Oil Chiller
|
| Low-Temp. Cold Air Jet
|
| Air Cooler for control box
|
| Swimming Pool Heat Pump
|
Air Source Heat Pump Water Heater
|
|
LY Double Circuits Oil Chiller |
|
|
|
Prevent excursion of main machine spindle axis |
|
Prevent the deformation of main machine caused by heat expansion |
|
Extend tool life-span |
|
Improve the precision of machining size |
|
Prevent oil oxidation and evaporation |
|
Stabilize oil pressure and prevent oil shock |
|
Easy operation and low noise |
|
Slender shape design, space saving |
|
Cooling water free |
|
Versatile control modes meet different requirements |
|
Run as efficiently as two units, cooling two different circuits of oil synchronously |
|
Temperature control modes for different cooling circuits can be set separately |
Type Explanation |
LY |
－ |
100/50 |
BX |
（G/T） |
a |
1 |
－ |
2 |
3 |
4 |
5 |
|
|
1 |
LY: single cooling precise oil chiller; LYR: with heating function |
2 |
Rated cooling capacity=nominal rate×100, unit:W |
3 |
B with water pump；B2 with dual pump; BX with pump and tank |
|
4 |
G) versatile control mode, factory setting is fixed temperature mode; (T): versatile control mode, factory-setting is tracing-temperature mode. |
5 |
Special order code |
|
|
 CNC lathe, High speed lathe
|
|
CNC grinder, broacher, miller |
| |
CNC muller |
| CNC machining center |
| Electronic discharge machine( EDM) |
| Other places needing oil cooling |
| |
|
Item/Type |
LY-65B/35B |
LY-100B/50B |
LY-220/80(T) |
LY-240/80 |
With heating function |
LYR-65B/35B |
LYR-100B/50B |
LY-220/80(T) |
LY-240/80 |
Cooling capacity |
W |
6500 |
10000 |
22000 |
32000 |
Kcal/H |
3500 |
5000 |
8000 |
27500 |
Power supply |
3P~380V /50Hz（3 phase, 4 line） |
Power input |
Compressor |
2580 |
3000 |
6000 |
7500 |
Fan motor |
200 |
250 |
500 |
500 |
Pump motor |
1500 |
2250 |
2250 |
2250 |
Flow（L/min） |
32 |
50 |
85 |
100 |
Temperature control range |
Fixed-temperature type: 15-45oC; Tracing-temperature type: indoor temperature +T℃(T=0~±9) |
Range of use |
10~43℃ |
Cooling medium |
Clean mineral hydraulic fluid and lubricant (excluding flammable mineral oil, glycol water soluble fluid, and corrosive fluid) |
Dimensions |
830X1600X1300 |
750X1470X1200 |
800X1500X1650 |
800X1512X1650 |
|
1. |
The cooling capacity test is based on the condition of ambient temperature 35℃, oil temperature 35℃, ISO VG2 oil and 30L/min oil circulation. |
2. |
The sample is our standard product. Special order also can be accepted. |
3. |
If used in cold regions, the product with heating function also can be offered. |
4. |
If oil tank is needed, please instruct the capacity while order |
5. |
Please keep the ventilation space of inlet and outlet more than 0.5m. Don’t block the ventilation space. |
6. |
Please install leakage circuit breaker at the power input terminal. |
7. |
Above parameters will change along with technical improvement without prior notice and the actual data are subject to the nameplate on the machine. |
|
|
|
|
|
|
|
|
