| 1、 |
The cooling capacity is tested based on the condition of ambient temperature 22℃ and inlet water temperature 32℃. Special specifications also can be accepted. |
| 2、 |
It is necessary to install an 80 or 100 mesh water filter in the water inlet to stop the impurity, or it will affect the cooling ability, even damage the system. |
| 3、 |
When the ambient temperature is below 2℃, the water remaining in the tank and pipeline may cause damage to the system. Please drain out the water. |
| 4、 |
It is forbidden to use or place any flammable or explosive items around the unit. |
| 5、 |
Don’t store any item around the unit which will block the inlet and outlet and result in inefficient heat sinking and unit damage. Don’t put items above the unit either. |
|
| 6 |
The unit power supply is 1P~220V/50 Hz, and the length of output lead should be more than 1.5mm. |
| 7、 |
Please clean the dusts on filter regularly by the dust collector, air nozzle and brush. |
| 8、 |
Please install leakage circuit breaker at the power input terminal. |
| 9、 |
Above parameters will change along with technical improvement without prior notice and the actual data are subject to the nameplate on the machine. |
| |
|
