CLY Immerging-type Oil Chiller |
|
|
|
Prevent the excursion of main machine spindle axis |
|
Prevent the deformation of main machine caused by heat expansion |
|
|
Extend tool life |
|
Improve the precision of machining size |
|
Prevent oil oxidation and evaporation |
|
Stabilize oil pressure and prevent oil shock |
|
Easy operation and low noise |
|
Slender shape design, space saving |
|
Cooling water free |
|
Versatile control modes meet different requirements |
Type Explanation |
CLY |
－ |
60 |
BX |
（G/T） |
a |
1 |
－ |
2 |
3 |
4 |
5 |
|
|
1 |
CLY: immerging-type precise oil chiller CLYR: immerging-type precise oil chiller with heating function |
2 |
Rated cooling capacity=nominal rate×100, unit: W |
3 |
B with water pump；B2 with dual pump; BX with pump and tank |
|
4 |
(G) full-function control mode, factory setting is fixed temperature mode; (T): full-function control mode, factory-setting is tracing-temperature mode. |
5 |
Special order code |
|
| Application Range |
|
 CNC lathe, High speed lathe
|
|
CNC grinder, broacher, miller |
| |
CNC muller |
| CNC machine center |
| Electronic discharge machine |
Other places for oil cooling
|
| Main Technical Parameters |
|
|
Item/Type |
CLY-15 |
CLY-20 |
CLY-25 |
CLY-35 |
CLY-50 |
CLY-60 |
CLY-90 |
With heating function |
CLYR-15 |
CLYR-20 |
CLYR-25 |
CLYR-35 |
CLYR-50 |
CLYR-60 |
CLYR-90 |
Cooling capacit |
W |
1500 |
2000 |
2500 |
3500 |
5000 |
6000 |
9000 |
Kcal/H |
1290 |
1720 |
2150 |
3010 |
4300 |
5160 |
7740 |
Power supply |
1P~220V /50Hz |
3~P 380V/50Hz |
Power input |
Compressor |
520 |
760 |
820 |
1205 |
1990 |
2580 |
3850 |
Fan motor |
85 |
85 |
85 |
85 |
230 |
230 |
320 |
Blender motor |
75 |
75 |
75 |
75 |
75 |
75x2 |
75x2 |
Refrigerant |
R22 |
Control range |
Fixed-temperature type: 15-45oC; Tracing-temperature type: indoor temperature +T℃(T=0~±9) |
Temperature range |
10~43℃ |
Cooling medium |
Water, water soluble cutting fluid /grinding fluid, cutting oil, grinding oil |
Dimensions |
WxDxH |
WxDxH |
WxDxH |
WxDxH |
WxDxH |
WxDxH |
WxDxH |
|
1. |
The cooling capacity is tested based on the condition of ambient temperature 35℃, oil temperature 35℃, ISO VG2 oil and 30L/min oil circulation. |
2. |
The sample is our standard product. Special order also can be accepted.。 |
3. |
If used in cold regions, the product with heating function also can be offered. |
4. |
Don’t use it to cool corrosive fluids. |
5. |
Chips or abrasive grains surrounding the condenser may debase the cooling ability. Please keep clean. |
6. |
Please keep the ventilation space of inlet and outlet more than 0.5m. Don’t block the ventilation space. |
7. |
Please install leakage circuit breaker at the power input terminal. |
8. |
Above parameters will change along with technical improvement and actual data is subject to the nameplate on the machine. There is no further notice. |
|
|
|
|
